Replacement Parts

NameSummaryPriceBuyhf:categories
1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 108′ Roll

1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.)

$233.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-g-replacement-parts
1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 50′ Roll

1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.)

$135.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-g-replacement-parts
1.5″ Pressure Bar Tape 10′ roll

1.5″ Pressure Bar Tape 10′ roll

$45.00
model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-6400-replacement-parts
1.5″ Pressure Bar Tape 108′ roll

1.5″ Pressure Bar Tape 108′ roll

$227.00
model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-6400-replacement-parts
1.5″ Pressure Bar Tape 25′ roll

1.5″ Pressure Bar Tape 25′ roll

$74.00
model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-6400-replacement-parts
1.5″ Pressure Bar Tape 50′ roll

1.5″ Pressure Bar Tape 50′ roll

$133.00
model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-6400-replacement-parts
1/2″ PTFE TAPE 108′ roll

1/2″ PTFE TAPE 108′ roll

$89.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-630ch-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts
1/2″ PTFE TAPE 50′ roll

1/2″ PTFE TAPE 50′ roll

$55.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-630ch-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts
1/4″ Heating Element for HDMP_ – 35″

Nichrome heater element with brass end tabs.

$116.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/4″ Heating Element for HDMP_ – 40″

Nichrome heater element with brass end tabs.

$121.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/4″ Heating Element for HDMP_ – 50″

Nichrome heater element with brass end tabs.

$126.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/4″ Heating Element for HDMP_ – 60″

Nichrome heater element with brass end tabs.

$138.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/4″ Heating Element for HDMP_ and 675_ – 25″

Nichrome heater element with brass end tabs.

$92.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/4″ Heating Element for HDMP_ and 675_ – 30″

Nichrome heater element with brass end tabs.

$97.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer
1/8″ Heating Element – 15″

1/8″ Heating Element – 15″

$19.00
model-20-replacement-parts model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
1/8″ Heating Element – 20″

1/8″ Heating Element – 20″

$23.00
model-235-replacement-parts model-50-replacement-parts
2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 108′ Roll

2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 108′ Roll

$252.00
model-630-replacement-parts model-6300-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 50′ Roll

2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 50′ Roll

$162.00
model-630-replacement-parts model-6300-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
2″ Pressure Bar Tape 10′ roll

2″ Pressure Bar Tape 10′ roll

$45.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts
2″ Pressure Bar Tape 108′ roll

2″ Pressure Bar Tape 108′ roll

$246.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts
2″ Pressure Bar Tape 25′ roll

2″ Pressure Bar Tape 25′ roll

$81.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts
2″ Pressure Bar Tape 50′ roll

2″ Pressure Bar Tape 50′ roll

$143.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts
2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 108′ Roll

2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 108′ Roll

$233.00
model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-6300sp-replacement-parts
2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll

2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll

$148.00
model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-8000-replacement-parts
235 Slider Assembly – Spring loaded element tensioner

235 Slider Assembly only fits the 235 Model machines.  The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats.

$59.00
model-235-replacement-parts
235 Stud Assembly for attaching fixed end of element

235 Stud assembly only fits the Model 235 machines. The locking insulated stud assembly is the fixed end post for connecting the heater element.

$24.00
model-235-replacement-parts
3/8″ Brazed Heating Element – 15″

3/8″ Brazed Heating Element – 15″

$84.00
model-5300-replacement-parts model-530plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
3/8″ Brazed Heating Element – 20″

3/8″ Brazed Heating Element – 20″

$89.00
model-5300-replacement-parts model-530plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts model-830-replacement-parts
3/8″ Brazed Heating Element – 25″

3/8″ Brazed Heating Element – 25″

$91.00
model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts model-830-replacement-parts
3/8″ Brazed Heating Element – 30″

3/8″ Brazed Heating Element – 30″

$96.00
model-530plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts model-830-replacement-parts
3/8″ Brazed Heating Element – 35″

3/8″ Brazed Heating Element – 35″

$101.00
model-530plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts
Brass Nut (undersized) for Stud Assembly

Brass nut is used to secure the element to the brass stud assembly post

$1.00
model-5300-replacement-parts model-6300-replacement-parts model-830-replacement-parts
Element Pad Assembly – 15″ (14-5/8″)

New EPA for models 5300,6300,730,830 replaces part # 608-0002 6/3/13

$30.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-730-replacement-parts model-830-replacement-parts
Element Pad Assembly – 20″ (19-3/4″)

New EPA for models 5300,6300,730,830 replaces part # 608-0002 6/3/13

$32.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Element Pad Assembly – 25″ (24-7/8″)

New EPA for models 5300,6300,730,830 replaces part # 608-0002 6/3/13

$35.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Element Pad Assembly – 30″ (30.00″)

New EPA for models 5300,6300,730,830 replaces part # 608-0002 6/3/13

$37.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-730-replacement-parts model-830-replacement-parts
Element Pad Assembly – 35″ (35.00″)

New EPA for models 5300,6300,730,830 replaces part # 608-0002 6/3/13

$40.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Element Pad Assembly (Lower Only) for 11″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$79.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Lower Only) for 16″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$81.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Lower only) for 8″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$77.00
model-8000-replacement-parts
Element Pad Assembly (Lower Only) for 8″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$79.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 11″ Dual Heat (Not High Temp)

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate

$79.00
model-830-replacement-parts
Element Pad Assembly (Upper Only) for 11″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$81.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 11″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$81.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat (Not High Temp)

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate

$81.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$84.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$84.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 8″ Dual Heat (Not High Temp)

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate

$77.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 8″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$79.00
model-8000-replacement-parts
Element Pad Assembly 15″ (14.25″ actual)

Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$30.00
model-20-replacement-parts model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts
Element Pad Assembly 20″ (19.25″ actual)

Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$32.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Element Pad Assembly 25″ (24.50″ actual)

Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$35.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts
Element Pad Assembly 30″ (29.50″ actual)

Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$37.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Element Pad Assembly 35″ (34.50″ actual)

Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$40.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Element Pad Assembly for 20″ 635HP machine (19.75″ actual length)

Element pad assembly is the pad between the heater element and seal bar on 635HP series machines that consists of 1/8″ Alum. pad, green gasket, red silicon rubber and covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$40.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Element Pad Assembly for 20″ Model 675_-20-__

The Element Pad Assembly for the 675 is the pad under the heater element that consists of green gasket material covered with 3/4″ wide PTFE fabric tape. The EPA is centered on the seal bar under the element and is held down by double sided tape.

$40.00
model-675-smartvac-replacement-parts
Element Pad Assembly for 25″ 635HP machine (24.875″ actual length)

Element pad assembly is the pad between the heater element and seal bar on 635HP series machines that consists of 1/8″ Alum. pad, green gasket, red silicon rubber and covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$42.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Element Pad Assembly for 25″ Model 675_-25-__

The Element Pad Assembly for the 675 is the pad under the heater element that consists of green gasket material covered with 3/4″ wide PTFE fabric tape. The EPA is centered on the seal bar under the element and is held down by double sided tape.

$41.00
model-675-smartvac-replacement-parts
Element Pad Assembly for 30″ 635HP machine

Element pad assembly is the pad between the heater element and seal bar on 635HP series machines that consists of 1/8″ Alum. pad, green gasket, red silicon rubber and covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$46.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Element Pad Assembly for 30″ Model 675_-30-__

The Element Pad Assembly for the 675 is the pad under the heater element that consists of green gasket material covered with 3/4″ wide PTFE fabric tape. The EPA is centered on the seal bar under the element and is held down by double sided tape.

$42.00
model-675-smartvac-replacement-parts
Element Pad Assembly for 35″ 635HP machine

Element pad assembly is the pad between the heater element and seal bar on 635HP series machines that consists of 1/8″ Alum. pad, green gasket, red silicon rubber and covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$50.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Element Pad Assembly for HDMP_ -232__ (Not TC) with 20″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$41.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -2B2__ (Not TC) with 20″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$42.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -332__ (Not TC) with 25″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$45.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -3B2__ (Not TC) with 25″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$46.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -432__ (Not TC) with 30″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$50.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -4B2__ (Not TC) with 30″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$51.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -532__ (Not TC) with 35″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$53.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -5B2__ (Not TC) with 35″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$55.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -632__ (Not TC) with 40″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$57.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -6B2__ (Not TC) with 40″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$58.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -732__ (Not TC) with 50″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$61.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -7B2__ (Not TC) with 50″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$62.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -832__ (Not TC) with 60″ x 1/4″ element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$64.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_ -8B2__ (Not TC) with 60″ x 3/8″ or 1/2″ wide element (Need 1 for each bar)

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$66.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer
Element Pad Assembly for HDMP_TC 30″ (Need 1 for each bar)

Element pad assembly is the pad under the heater element that consists of 1/16″ grey rubber covered with 3/4″ wide PTFE fabric tape. The EPA is centered on top of the red fiberglass material on the seal bar.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$52.00
model-hdmp3-tc
Element Pad Assembly for HDMP_TC 35″ (Need 1 for each bar)

Element pad assembly is the pad under the heater element that consists of 1/16″ grey rubber covered with 3/4″ wide PTFE fabric tape. The EPA is centered on top of the red fiberglass material on the seal bar.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$55.00
model-hdmp3-tc
Element Pad Assembly for HDMP_TC 40″ (Need 1 for each bar)

Element pad assembly is the pad under the heater element that consists of 1/16″ grey rubber covered with 3/4″ wide PTFE fabric tape. The EPA is centered on top of the red fiberglass material on the seal bar.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$58.00
model-hdmp3-tc
Element Pad Assembly for HDMP_TC 50″ (Need 1 for each bar)

Element pad assembly is the pad under the heater element that consists of 1/16″ grey rubber covered with 3/4″ wide PTFE fabric tape. The EPA is centered on top of the red fiberglass material on the seal bar.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

$62.00
model-hdmp3-tc
Element Pad Assembly for model 235 Machine

Element pad assembly is the pad under the heater element that consists of 3/8″ tall Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$28.00
model-235-replacement-parts
Element Pad Assembly for Model 50 Tube Sealer

Element Pad Assembly for the Model 50 Tube Sealer is the pad under the heater element that consists of a masonite pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included.

$46.00
model-50-replacement-parts
Exhaust Silencer for Vacuum Sealer with 3/8″ Exhaust

Exhaust Silencer with 3/8″ tubing is used to quiet the exhaust noise from the vacuum sealer.

$110.00
model-675-smartvac-replacement-parts model-675tc-replacement-parts
Exhaust Silencer for Vacuum Sealers with 1/2″ Exhaust Port(s)

Exhaust Silencer with 1/2″ tube is used to quiet the exhaust noise from the vacuum sealer. For Models: HDMP, 635HP, Validatable 635 Gas and Vac models, 635G, and 8000.

$110.00
model-hdmp3-vacuum-sealer model-hdmp3-tc
Finger Nut ( Brass )

Brass Finger nut is used to secure the element to the element post.

Finger nuts are sold as an Each Quantity.

$2.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Foot Switch (Electric, 3 Wire) with 8′ Cord (Not for models 235, 35 nor 35G)

Replacement Foot switch with 8′ wire for all models Except 235, 35 and 35G. See part #306-0069 for switch only (without cable) for ease of installation or if you have an extended cable (longer than 8′).

$78.00
model-30-impulse-sealer model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-630ch-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-6400-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-8000-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Foot Switch (Electric, 4 Wire) with 6′ Cord (Only for models 235, 35 & 35G)

Replacement Foot switch with 4 wire cable that is 6′ long. Only for all models 235, 35 and 35G.
See part #306-0069 for switch only (without cable) for ease of installation or if you have an extended cable (longer than 6′).

$78.00
model-235-replacement-parts model-35-replacement-parts model-35g-replacement-parts
Foot Switch without cord

Replacement Foot switch without cable.  May be easier to install as no entry to case will be needed. Pay close attention to how wires are connected to your current switch so new switch can be wired correctly.

$52.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-6400-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-8000-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Gas Rocker Switch-White with dual lighted indicator

Gas Rocker Switch.

$34.00
model-35g-replacement-parts
Grommet, Silicone Black

Grommet for Constant Heat Seal Bar and HDMP Vacuum Nozzle Cylinders.

$9.00
model-630ch-replacement-parts model-6400-replacement-parts model-hdmp3-vacuum-sealer model-hdmp3-tc
Heat / Cool Timer (Old style ATC type) Tan or Black color. Compare to picture or call if questions.

Heat or Cool Timer. Timer has Adjustable time setting. When replacing Heat Timer set at ’10SEC’. When replacing Cool Timer set at ‘1 MIN’. If you prefer the timer to be preset at factory, Please make a note in the comments section of the Order Screen indicating which Timer you are Replacing.

$174.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-60-replacement-parts
Heater Cartridge 120V, Round – 15″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$317.00
model-6400-replacement-parts
Heater Cartridge 120V, Round – 20″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$362.00
model-6400-replacement-parts
Heater Cartridge 120V, Round – 8″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$251.00
model-6400-replacement-parts
Heater Cartridge 220V, Round – 15″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$317.00
model-6400-replacement-parts
Heater Cartridge 220V, Round – 20″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$362.00
model-6400-replacement-parts
Heater Cartridge 220V, Round – 8″ Heat length

Round type Heater Cartridge for Model 6400 (and some converted 630CH) Constant Heat Sealers 120V.

$251.00
model-6400-replacement-parts
Heating Element – 1/4″ x 11″ for 11″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$123.00
model-8000-replacement-parts
Heating Element – 1/4″ x 15″

Heating Element – 1/4″ x 15″

$19.00
model-20-replacement-parts model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Heating Element – 1/4″ x 16″ for 16″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$126.00
model-8000-replacement-parts
Heating Element – 1/4″ x 20″

Heating Element – 1/4″ x 20″

$23.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Heating Element – 1/4″ x 25″

Heating Element – 1/4″ x 25″

$28.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Heating Element – 1/4″ x 30″

Heating Element – 1/4″ x 30″

$32.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Heating Element – 1/4″ x 35″

Heating Element – 1/4″ x 35″

$39.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Heating Element – 1/4″ x 8″ for 8″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$121.00
model-8000-replacement-parts
Heating Element – 3/8″ x 11″ for 11″ Dual Heat Machines

Heating Element – 3/8″ x 11″ for 11″ Dual Heat Machines

$96.00
model-8000-replacement-parts model-830-replacement-parts
Heating Element – 3/8″ x 16″ for 16″ Dual Heat Machines

Heating Element – 3/8″ x 16″ for 16″ Dual Heat Machines

$101.00
model-8000-replacement-parts model-830-replacement-parts
Heating Element – 3/8″ x 20″ for HDMP_-2B_ and 675_-20-_B

Heating Element – 3/8″ x 20″ for HDMP_-2B_ and 675_-20-_B

$86.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 25″ for HDMP_-3B_ and 675_-25-_B

Heating Element – 3/8″ x 25″ for HDMP_-3B_ and 675_-25-_B

$99.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 30″ for HDMP_-4B_ and 675_-30-_B

Heating Element – 3/8″ x 30″ for HDMP_-4B_ and 675_-30-_B

$105.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 35″ for HDMP_-5B_

Heating Element – 3/8″ x 25″ for HDMP_-5B

$121.00
model-675-smartvac-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 40″ for HDMP_-6B_

Heating Element – 3/8″ x 40″ for HDMP_-6B_

$127.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 50″ for HDMP_-7B_

Heating Element – 3/8″ x 40″ for HDMP_-6B_

$130.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 60″ for HDMP_-8B_

Heating Element – 3/8″ x 40″ for HDMP_-6B_

$143.00
model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 3/8″ x 8″ for 8″ Dual Heat Machines

Heating Element – 3/8″ x 8″ for 8″ Dual Heat Machines

$94.00
model-8000-replacement-parts
Heating Element, Beaded Band – 1/4″ x 20″

1/4″ wide Heating Element with raised ridge down the center for creating a tear strip.

$40.00
model-235-replacement-parts
High Tension Slider Assembly – Spring loaded element tensioner

*For Most Models* The High Tension Slider Assembly fits most machines. It does not fit the model 635HP, 235 series, model 50 and model 60. The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats.

$59.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-730-replacement-parts model-830-replacement-parts
Kapton Tape Set for 11″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$40.00
model-8000-replacement-parts
Kapton Tape Set for 16″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$47.00
model-8000-replacement-parts
Kapton Tape Set for 8″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$37.00
model-8000-replacement-parts
Locking Insulated Brass Stud Assembly

The locking insulated Brass stud assembly is the fixed post for the heater element. If you have any questions, refer to your Operator Manual or call Accu-Seal.

$30.00
model-5300-replacement-parts model-6300-replacement-parts model-830-replacement-parts
Locking Insulated Stud Assembly with SS hardware

Locking Insulated Stud assembly with SS Hardware fits most Machines. It does not fit the model 235, model 50, or model 60 series machines. The locking insulated stud assembly is the fixed end post for connecting the heater element.

$24.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts
Main Power Switch-White with lighted indicator

Replacement Main Power Switch. May or may not have green light on switch. 306-0024 replaces 306-0023.

$39.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 15″

The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element.

$13.00
model-30-impulse-sealer model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts
Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 20″

The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element.

$15.00
model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 25″

The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element.

$18.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-g-replacement-parts
Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 30″

The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element.

$19.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 35″

The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element.

$20.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar (Upper one) PTFE Tape Cover Set for 20″ model 675_-20-_

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 3/4″ Red Silicon Foam and double side tape.

$30.00
model-675-smartvac-replacement-parts
Pressure Bar (Upper one) PTFE Tape Cover Set for 25″ model 675_-25-_

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 3/4″ Red Silicon Foam and double side tape.

$35.00
model-675-smartvac-replacement-parts
Pressure Bar (Upper one) PTFE Tape Cover Set for 30″ model 675_-30-_

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 3/4″ Red Silicon Foam and double side tape.

$37.00
model-675-smartvac-replacement-parts
Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for 1 pc. Alum Bars on 30″ machines

Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad.

$37.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for 1 pc. Alum Bars on 35″ machines

Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad.

$42.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for Alum Bars on 15″ machines

Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad.

$21.00
model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts
Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for Alum Bars on 25″ machines

Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad.

$35.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar 2″ PTFE Tape & 1/2″ Rubber Cover Set for 15″ x 1″ SS bars

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 1/2″ Red Silicon Foam and double side tape.

$23.00
model-5300-replacement-parts
Pressure Bar 2″ PTFE Tape & 1/2″ Rubber Cover Set for 20″ x 1″ SS bars

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 1/2″ Red Silicon Foam and double side tape.

$25.00
model-5300-replacement-parts
Pressure Bar 2″ PTFE Tape & 1/2″ Rubber Cover Set for 25″ x 1″ SS bars

The PTFE Fabric tape cover set includes a strip of 2″ adhesive backed PTFE Fabric tape, a strip of 1/2″ Red Silicon Foam and double side tape.

$28.00
model-5300-replacement-parts
Pressure Bar Insert (14.25″) for older style 15″ machines

Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement.

$50.00
model-20-replacement-parts model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts
Pressure Bar Insert (19.25″) for older style 20″ machines

Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement.

$53.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar Insert (24.50″) for older style 25″ machines

Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement.

$59.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar Insert (29.50″) for 30″ machines

Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement.

$66.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Bar Insert (34.50″) for 35″ machines

Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement.

$72.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Pressure Pad Assembly for 20″ 635HP Machines (19.75″ overall length)

The pressure pad assembly is a piece of 3/8″ tall aluminum covered with green gasket, red silicon rubber and PTFE Fabric Tape. It is the pad mounted to the case opposite the heater element on the seal bar.

$57.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Pressure Pad Assembly for 25″ 635HP Machines (24-7/8″ overall length)

The pressure pad assembly is a piece of 3/8″ tall aluminum covered with green gasket, red silicon rubber and PTFE Fabric Tape. It is the pad mounted to the case opposite the heater element on the seal bar.

$61.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Pressure Pad Assembly for 30″ 635HP Machines

The pressure pad assembly is a piece of 3/8″ tall aluminum covered with green gasket, red silicon rubber and PTFE Fabric Tape. It is the pad mounted to the case opposite the heater element on the seal bar.

$64.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Pressure Pad Assembly for 35″ 635HP Machines

The pressure pad assembly is a piece of 3/8″ tall aluminum covered with green gasket, red silicon rubber and PTFE Fabric Tape. It is the pad mounted to the case opposite the heater element on the seal bar.

$68.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Pressure Pad Assembly for Model 50 Tube Sealer – 20″ (For side without element)

The Pressure Pad Assembly for Model 50 is a piece of aluminum covered with green gasket and PTFE Fabric Tape. It is the pad opposite side of the heater element.

$32.00
model-50-replacement-parts
Pressure Pad Assembly-15″ Constant Heat Machines

The pressure pad assembly is a piece of aluminum covered with red silicon rubber, red silicon foam and PTFE Fabric Tape. It is the pad opposite the heater platten.

$37.00
model-630ch-replacement-parts model-6400-replacement-parts
Pressure Pad Assembly-20"

The pressure pad assembly is a piece of aluminum covered with red rubber and PTFE Fabric Tape. It is the pad opposite the heater element.

$24.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Pressure Pad Assembly-20″ Constant Heat Machines

The pressure pad assembly is a piece of aluminum covered with red silicon rubber, red silicon foam and PTFE Fabric Tape. It is the pad opposite the heater platten.

$40.00
model-630ch-replacement-parts model-6400-replacement-parts
Pressure Pad Assembly-25"

The pressure pad assembly is a piece of aluminum covered with red rubber and PTFE Fabric Tape. It is the pad opposite the heater element.

$28.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Pressure Pad Assembly-30"

The pressure pad assembly is a piece of aluminum covered with red rubber and PTFE Fabric Tape. It is the pad opposite the heater element.

$31.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Pressure Pad Assembly-35"

The pressure pad assembly is a piece of aluminum covered with red rubber and PTFE Fabric Tape. It is the pad opposite the heater element.

$35.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Pressure Pad Assembly-8″ Constant Heat Machines

The pressure pad assembly is a piece of aluminum covered with red silicon rubber, red silicon foam and PTFE Fabric Tape. It is the pad opposite the heater platten.

$32.00
model-630ch-replacement-parts model-6400-replacement-parts
Pressure Pad Rubber-Red, 1/2″ wide – 10ft . Roll

10′ x 1/8 x 1/2″ wide foam rubber with adhesive backing for use on the pressure bar. Needs to be covered with PTFE Tape.

$74.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
PTFE Tape Set for models 630CH & 6400 – 15"

The PTFE Fabric tape set includes a strip of 1 1/2″ adhesive backed PTFE Fabric tape and a strip of 1/2″ adhesive backed PTFE Fabric tape

$19.00
model-630ch-replacement-parts model-6400-replacement-parts
PTFE Tape Set for models 630CH & 6400 – 20"

The PTFE Fabric tape set includes a strip of 1 1/2″ adhesive backed PTFE Fabric tape and a strip of 1/2″ adhesive backed PTFE Fabric tape

$21.00
model-630ch-replacement-parts model-6400-replacement-parts
PTFE Tape Set for models 630CH & 6400 – 8″

The PTFE Fabric tape set includes a strip of 1 1/2″ adhesive backed PTFE Fabric tape and a strip of 1/2″ adhesive backed PTFE Fabric tape

$15.00
model-630ch-replacement-parts model-6400-replacement-parts
Seal Jaw Service Kit for _635HP-2B__ (20″ x 3/8″ seal)

This 635HP Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, two Stainless Steel finger nuts, two lock washers, and a strip of 2-1/2″ wide PTFE Fabric tape with a 1″ non-adhesive zone for over the element.

$184.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Seal Jaw Service Kit for _635HP-3B__ (25″ x 3/8″ seal)

This 635HP Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, two Stainless Steel finger nuts, two lock washers, and a strip of 2-1/2″ wide PTFE Fabric tape with a 1″ non-adhesive zone for over the element.

$206.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Seal Jaw Service Kit for _635HP-4B__ (30″ x 3/8″ seal)

This 635HP Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, two Stainless Steel finger nuts, two lock washers, and a strip of 2-1/2″ wide PTFE Fabric tape with a 1″ non-adhesive zone for over the element.

$219.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Seal Jaw Service Kit for _635HP-5B__ (35″ x 3/8″ seal)

This 635HP Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, two Stainless Steel finger nuts, two lock washers, and a strip of 2-1/2″ wide PTFE Fabric tape with a 1″ non-adhesive zone for over the element.

$231.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Seal Jaw Service Kit for 15″ Alum Bar & 1/4″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 1/4″ heater element, Brass finger nut and a strip of 1-1/2″ PTFE Fabric tape with a 1/2″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$138.00
model-30-impulse-sealer model-530plus-replacement-parts model-540plus-replacement-parts
Seal Jaw Service Kit for 15″ Alum Bar & 3/8″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 3/8″ heater element, Brass finger nut and a strip of 2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$182.00
model-530plus-replacement-parts model-540plus-replacement-parts
Seal Jaw Service Kit for 20″ Alum Bar & 1/4″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 1/4″ heater element, Brass finger nut and a strip of 1-1/2″ PTFE Fabric tape with a 1/2″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$145.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Seal Jaw Service Kit for 20″ Alum Bar & 3/8″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 3/8″ heater element, Brass finger nut and a strip of 2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$194.00
model-530plus-replacement-parts model-540plus-replacement-parts
Seal Jaw Service Kit for 25″ Alum Bar & 1/4″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 1/4″ heater element, Brass finger nut and a strip of 1-1/2″ PTFE Fabric tape with a 1/2″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$148.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Seal Jaw Service Kit for 25″ Alum Bar & 3/8″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar assembly, 3/8″ heater element, Brass finger nut and a strip of 2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$211.00
model-530plus-replacement-parts model-540plus-replacement-parts
Seal Jaw Service Kit for 30″ Alum Bar & 1/4″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar insert assembly, 1/4″ heater element, Brass finger nut and a strip of 1-1/2″ PTFE Fabric tape with a 1/2″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$150.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Seal Jaw Service Kit for 35″ Alum Bar & 1/4″ Element

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar insert assembly, 1/4″ heater element, Brass finger nut and a strip of 1-1/2″ PTFE Fabric tape with a 1/2″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$153.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Seal Jaw Service Kit for 630/730/830 – 20″

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$148.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Seal Jaw Service Kit for 630/730/830 – 25″

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$166.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Seal Jaw Service Kit for 630/730/830 – 30″

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$172.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Seal Jaw Service Kit for 630/730/830 – 35"

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$184.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-730-replacement-parts model-830-replacement-parts
Seal Jaw Service Kit for 630/730/830 (15″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$135.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts model-830-replacement-parts
Seal Jaw Service Kit for Model _235-222 (has a 1/8″ wide element)

Service Jaw Seal Kit for the Model 235-232 includes a complete Pressure Bar Assembly with tape, rubber pad and acorn nuts, an Element Pad Assembly with tape for under the element, a 1/4″ wide heating element, brass thumb nuts for attaching the element and PTFE Zone Tape to go over the element.

$172.00
model-235-replacement-parts
Seal Jaw Service Kit for Model _235-232 (has a 1/4″ wide element)

Service Jaw Seal Kit for the Model 235-232 includes a complete Pressure Bar Assembly with tape, rubber pad and acorn nuts, an Element Pad Assembly with tape for under the element, a 1/4″ wide heating element, brass thumb nuts for attaching the element and PTFE Zone Tape to go over the element.

$172.00
model-235-replacement-parts
Seal Jaw Service Kit for Model 50 machines with 1/4″ Element (Model _50-223)

The Seal Jaw Service Kit for the Model 50 includes: A Heating Element, Thumb Nuts to attach the element, an Element Pad Assembly for under the element, Pressure Pad Assembly for across from the element side and 1-1/2″ wide PTFE zone tape to cover the element

$81.00
model-50-replacement-parts
Seal Jaw Service Kit for Model 50 machines with 1/8″ Element (Model _50-223)

The Seal Jaw Service Kit for the Model 50 includes: A Heating Element, Thumb Nuts to attach the element, an Element Pad Assembly for under the element, Pressure Pad Assembly for across from the element side and 1-1/2″ wide PTFE zone tape to cover the element

$81.00
model-50-replacement-parts
Seal Jaw Service Kit for Model 5300-15-B_ (15″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar tape & rubber, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$135.00
model-5300-replacement-parts
Seal Jaw Service Kit for Model 5300-20-B_ (20″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar tape & rubber, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$142.00
model-5300-replacement-parts
Seal Jaw Service Kit for Model 5300-25-B_ (25″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure bar tape & rubber, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element. Not for High Temperature (HT) models.

$148.00
model-5300-replacement-parts
Seal Jaw Service Kit for Model 6300-15-B_ (15″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$148.00
model-6300-replacement-parts
Seal Jaw Service Kit for Model 6300-20-B_ (20″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$154.00
model-6300-replacement-parts
Seal Jaw Service Kit for Model 6300-25-B_ (25″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$160.00
model-6300-replacement-parts
Seal Jaw Service Kit for Model 6300-30-B_ (30″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$172.00
model-6300-replacement-parts
Seal Jaw Service Kit for Model 6300-35-B_ (35″)

The Seal Jaw Service Kit includes: The element pad assembly, pressure pad assembly, 3/8″ heater element, one Stainless Steel finger nut, one brass nut, washers, lock washers and a strip of 2 1/2″ PTFE Fabric tape with a 1″ non-adhesive zone for over the element.  Not for Dual (Upper & Lower) heat versions.

$178.00
model-6300-replacement-parts
Slider Assembly for 635HP – Spring loaded element tensioner

This Slider Assembly only fits on the 635HP series of machines. The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats.

$50.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Stainless Steel Finger Nut

The stainless steel finger nut is used to secure the element to the slider post assembly.

$9.00
model-5300-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-730-replacement-parts model-830-replacement-parts
Super Slider Assembly – Spring loaded element tensioner

Super Slider Assembly fits a few of the longer 30″ & 35″ “Closed Bar End” types of machines. It does not fit the model 635HP. The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats.

$81.00
model-630-replacement-parts model-730-replacement-parts
Support Tray (White) for 35″ Heat Sealer

White powder Coated Product Support tray fits on the front of 35″ Heat Sealer and Vacuum Sealer Models; 20,30,35,635, and 530.

$135.00
model-20-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-530plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Thermocouple Assembly – 8000 w/Boot & Tube

The thermocouple assembly on the Model 8000 Vacuum Sealer consists of the Thermocouple, connector, and boot. There is also a piece of 1/8″ tubing to secure the thermocouple wire in the TC block and a piece of 1/2″ Teflon to cover the wire.

$244.00
model-8000-replacement-parts
Thermocouple Assembly with boot, pad & 15″ long yellow sleeve

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. Replacement thermocouples are mounted on a piece of aluminum and taped in place for easy installation on your validatable heat sealer. This NEMA thermocouple has a silicone boot.

$270.00
model-6300-replacement-parts model-830-replacement-parts
Thermocouple Assembly with boot, pad & 4.5″ long yellow sleeve

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. Replacement thermocouples are mounted on a piece of aluminum and taped in place for easy installation on your validatable heat sealer. This NEMA thermocouple has a silicone boot.

$264.00
model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-730-replacement-parts
Thermocouple Assembly with boot, pad & 4.5″ long yellow sleeve

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. Replacement thermocouples are mounted on a piece of aluminum and taped in place for easy installation on your validatable heat sealer. This NEMA thermocouple has a silicone boot.

$264.00
model-5300-replacement-parts
Thermocouple Assembly with boot, tube & 15″ long yellow sleeve

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. This model of replacement thermocouple is held in place by a small piece of blue tubing and taped in place for easy installation on your validatable heat sealer. This NEMA thermocouple has a silicone boot.

$252.00
model-675tc-replacement-parts model-hdmp3-tc
Thermocouple Assembly with pad, gasket & 3.5″ long yellow sleeve

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. This replacement thermocouples is taped in place for easy installation on your heat sealer.

$258.00
model-530plus-replacement-parts model-540plus-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Thermocouple Assembly, Surface Mount CH(15″CH-1 & 20″CH-2) & all 6400 models

For 15″ and 20″ 630CH Constant Heat and all model 6400 Constant Heat Sealers built After April 2007. Surface Mount Thermocouple Assembly. Fits on “B” style heater platten

$99.00
model-630ch-replacement-parts model-6400-replacement-parts
Thermocouple Assembly, T Nozzle Type for 8″ Model 630CH Constant Heat Only

For 8″ 630CH Constant Heat machines only. Nozzle Type Thermocouple Assembly.

$129.00
model-630ch-replacement-parts
Thermocouple Assy for 830 Dual Heat Machines (Yellow sleeve is 15″)

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. This model of replacement thermocouple is held in place by a small piece of blue tubing and taped in place for easy installation on your validatable heat sealer. This NEMA thermocouple has a silicone boot.

$264.00
model-830-replacement-parts
Thermocouple, with 4.5″ Yellow sleeve, Boot and Mounting pad for 635HP models

Thermocouple is used to sense heat at the seal area on the impulse heat sealer. Replacement thermocouples are mounted on a piece of aluminum and taped in place for easy installation on your heat sealer or vacuum sealer. The NEMA thermocouple has a silicone boot. Specific to model 635HP.

$270.00
model-635hp-replacement-parts model-635hp-g-replacement-parts
Timer, Cool – ATE1-60S (Now universal model ATE8-4D)

Timer ATE1-60S is used as the Cool Timer on models built after May 2012. The timer is used to set the amount of time that the bar remains closed for cooling the bag after the heat cycle. NOTE: The Model 50 uses the ATE1-60S for Both Heat and Cool Timers.

$65.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-60-replacement-parts
Timer, Heat – ATE1-10S (now universal model ATE8-4D)

Timer ATE1-10S is used as the Heat Timer on models built after May 2012. The heat timer is used to set the amount of time that Heat is applied to the element for heat sealing.

$65.00
model-20-replacement-parts model-235-replacement-parts model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-60-replacement-parts
Vac Jaw Service Kit for 20″ Alum Bar

The Vac Jaw Service Kit includes: The vacuum pad assembly and Vacuum Bar Assembly.

$121.00
model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Vac Jaw Service Kit for 235 Machines (Model _235-2_2)

The Vac Jaw Service Kit includes: The vacuum pad assembly and Vacuum Bar Assembly with acorn nuts.

$108.00
model-235-replacement-parts
Vac Jaw Service Kit for 25″ Alum Bar

The Vac Jaw Service Kit includes: The vacuum pad assembly and Vacuum Bar Assembly.

$123.00
model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Vac Jaw Service Kit for 30″ Machines with Alum Bar

The Vac Jaw Service Kit includes: The vacuum pad assembly and Vacuum Bar Assembly.

$86.00
model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Vac Jaw Service Kit for 35″ Machines with Alum Bar

The Vac Jaw Service Kit includes: The vacuum pad assembly and Vacuum Bar Assembly.

$96.00
model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts
Vacuum Filter- 1/4″ In/Out (Only for machines with existing vac filters)

The vacuum Filter is used to remove moisture or liquids from the vacuum lines on most model vacuum sealers. In/Out 1/4″. Filters particles to 10 microns. Vacuum Filter uses replacement filter cartridge# 104-0012

$123.00
model-235-replacement-parts model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-8000-replacement-parts
Vacuum Filter- 3/8″ In/Out. Only for machines with existing filters

The vacuum Filter is used to remove moisture or liquids from the vacuum lines on HDMP Vacuum Sealers. In/Out (3/8″). Filters particles to 10 microns. Vacuum Filter uses replacement filter cartridge# 104-0012. This is only for machines with existing filters.

$129.00
model-hdmp3-tc
Vacuum Nozzle for 235 Model machines

Vacuum Nozzle for 235 Machines only. Includes mounting block and air connection fitting.

$215.00
model-235-replacement-parts
Vacuum Pad 1/2″x3/8″ Black Rubber with adhesive. 10′ – 4″ Roll for HDMP_ GV Machines

Vacuum Pad 1/2″x3/8″ Black Rubber with adhesive. 10′ – 4″ Roll for HDMP_ GV Machines

$74.00
model-hdmp3-vacuum-sealer model-hdmp3-tc
Vacuum Pad Assembly Set for 675__-20 Machine (20.5″ Overall Length)

Vacuum Pad Assembly Set for 675__-20 Machine (20.5″ Overall Length)

$26.00
model-675-smartvac-replacement-parts model-675tc-replacement-parts
Vacuum Pad Assembly Set for 675__-25 Machine (25.5″ Overall Length)

Vacuum Pad Assembly Set for 675__-25 Machine (25.5″ Overall Length)

$32.00
model-675-smartvac-replacement-parts
Vacuum Pad Assembly Set for 675__-30 Machine (30.5″ Overall Length)

Vacuum Pad Assembly Set for 675__-30 Machine (30.5″ Overall Length)

$39.00
model-675-smartvac-replacement-parts
Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$25.00
model-8000-replacement-parts
Vacuum Pad Assembly Set for 8511- 11″ Machine (2pcs @ 16.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$29.00
model-8000-replacement-parts
Vacuum Pad Assembly Set for 8516- 16″ Machine (2pcs @ 21.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$35.00
model-8000-replacement-parts