Model HDMP3
Name | Summary | Price | Buy |
---|---|---|---|
1/4″ Heating Element for HDMP_ and 675_ – 25″ | Nichrome heater element with brass end tabs. | $96.85 | |
1/4″ Heating Element for HDMP_ and 675_ – 30″ | Nichrome heater element with brass end tabs. | $101.85 | |
1/4″ Heating Element for HDMP_ – 35″ | Nichrome heater element with brass end tabs. | $116.00 | |
1/4″ Heating Element for HDMP_ – 40″ | Nichrome heater element with brass end tabs. | $121.00 | |
1/4″ Heating Element for HDMP_ – 50″ | Nichrome heater element with brass end tabs. | $126.00 | |
1/4″ Heating Element for HDMP_ – 60″ | Nichrome heater element with brass end tabs. | $138.00 | |
2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 108′ Roll | 2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 108′ Roll | $279.85 | |
2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 50′ Roll | 2-1/2″ wide PTFE Fabric Tape with 1″ non-sticky zone down the middle for over the element. – 50′ Roll | $193.85 | |
Element Pad Assembly for HDMP_ -232__ (Not TC) with 20″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $41.00 | |
Element Pad Assembly for HDMP_ -2B2__ (Not TC) with 20″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $42.00 | |
Element Pad Assembly for HDMP_ -332__ (Not TC) with 25″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $45.00 | |
Element Pad Assembly for HDMP_ -3B2__ (Not TC) with 25″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $46.00 | |
Element Pad Assembly for HDMP_ -432__ (Not TC) with 30″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $50.00 | |
Element Pad Assembly for HDMP_ -4B2__ (Not TC) with 30″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $51.00 | |
Element Pad Assembly for HDMP_ -532__ (Not TC) with 35″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $53.00 | |
Element Pad Assembly for HDMP_ -5B2__ (Not TC) with 35″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $55.00 | |
Element Pad Assembly for HDMP_ -632__ (Not TC) with 40″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $57.00 | |
Element Pad Assembly for HDMP_ -6B2__ (Not TC) with 40″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $58.00 | |
Element Pad Assembly for HDMP_ -732__ (Not TC) with 50″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $61.00 | |
Element Pad Assembly for HDMP_ -7B2__ (Not TC) with 50″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $62.00 | |
Element Pad Assembly for HDMP_ -832__ (Not TC) with 60″ x 1/4″ element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $64.00 | |
Element Pad Assembly for HDMP_ -8B2__ (Not TC) with 60″ x 3/8″ or 1/2″ wide element (Need 1 for each bar) | HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included. Generally need 2 pcs for each machine. One for the upper bar heating element and 1 for the lower bar element. | $66.00 | |
Exhaust Silencer for Vacuum Sealers with 1/2″ Exhaust Port(s) | Exhaust Silencer with 1/2″ tube is used to quiet the exhaust noise from the vacuum sealer. For Models: HDMP, 635HP, Validatable 635 Gas and Vac models, 635G, and 8000. | $110.00 | |
Foot Switch (Electric, 3 Wire) with 8′ Cord (Not for models 235, 35 nor 35G) | Replacement Foot switch with 8′ wire for all models Except 235, 35 and 35G. See part #306-0069 for switch only (without cable) for ease of installation or if you have an extended cable (longer than 8′). | $108.85 | |
Foot Switch without cord | Replacement Foot switch without cable. May be easier to install as no entry to case will be needed. Pay close attention to how wires are connected to your current switch so new switch can be wired correctly. | $56.85 | |
Grommet, Silicone Black | Grommet for Constant Heat Seal Bar and HDMP Vacuum Nozzle Cylinders. | $9.00 | |
Heating Element – 3/8″ x 20″ for HDMP_-2B_ and 675_-20-_B | Heating Element – 3/8″ x 20″ for HDMP_-2B_ and 675_-20-_B | $85.85 | |
Heating Element – 3/8″ x 25″ for HDMP_-3B_ and 675_-25-_B | Heating Element – 3/8″ x 25″ for HDMP_-3B_ and 675_-25-_B | $98.85 | |
Heating Element – 3/8″ x 30″ for HDMP_-4B_ and 675_-30-_B | Heating Element – 3/8″ x 30″ for HDMP_-4B_ and 675_-30-_B | $104.85 | |
Heating Element – 3/8″ x 35″ for HDMP_-5B_ | Heating Element – 3/8″ x 25″ for HDMP_-5B | $130.00 |