Model 35
| Name | Summary | Price | Buy |
|---|---|---|---|
| 1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 108′ Roll | 1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.) | $239.85 | |
| 1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 50′ Roll | 1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.) | $153.85 | |
| 1/2″ PTFE TAPE 108′ roll | 1/2″ PTFE TAPE 108′ roll | $89.85 | |
| 1/2″ PTFE TAPE 50′ roll | 1/2″ PTFE TAPE 50′ roll | $61.85 | |
| 2″ Pressure Bar Tape 108′ roll | 2″ Pressure Bar Tape 108′ roll | $254.85 | |
| 2″ Pressure Bar Tape 10′ roll | 2″ Pressure Bar Tape 10′ roll | $51.85 | |
| 2″ Pressure Bar Tape 25′ roll | 2″ Pressure Bar Tape 25′ roll | $87.85 | |
| 2″ Pressure Bar Tape 50′ roll | 2″ Pressure Bar Tape 50′ roll | $159.85 | |
| Element Pad Assembly 20″ (19.25″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $31.85 | |
| Element Pad Assembly 25″ (24.50″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $34.85 | |
| Element Pad Assembly 30″ (29.50″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $42.85 | |
| Element Pad Assembly 35″ (34.50″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $47.85 | |
| Finger Nut ( Brass ) | Brass Finger nut is used to secure the element to the element post. Finger nuts are sold as an Each Quantity. | $2.00 | |
| Foot Switch (Electric, 4 Wire) with 6′ Cord (Only for models 235, 35 & 35G) | Replacement Foot switch with 4 wire cable that is 6′ long. Only for all models 235, 35 and 35G. | $78.00 | |
| Foot Switch without cord | Replacement Foot switch without cable. May be easier to install as no entry to case will be needed. Pay close attention to how wires are connected to your current switch so new switch can be wired correctly. | $56.85 | |
| Heat / Cool Timer (Old style ATC type) Tan or Black color. Compare to picture or call if questions. | Heat or Cool Timer. Timer has Adjustable time setting. When replacing Heat Timer set at ’10SEC’. When replacing Cool Timer set at ‘1 MIN’. If you prefer the timer to be preset at factory, Please make a note in the comments section of the Order Screen indicating which Timer you are Replacing. | $228.85 | |
| Heating Element – 1/4″ x 30″ | Heating Element – 1/4″ x 30″ | $33.85 | |
| Heating Element – 1/4″ x 35″ | Heating Element – 1/4″ x 35″ | $40.85 | |
| High Tension Slider Assembly – Spring loaded element tensioner | *For Most Models* The High Tension Slider Assembly fits most machines. It does not fit the model 635HP, 235 series, model 50 and model 60. The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats. | $74.85 | |
| Locking Insulated Stud Assembly with SS hardware | Locking Insulated Stud assembly with SS Hardware fits most Machines. It does not fit the model 235, model 50, or model 60 series machines. The locking insulated stud assembly is the fixed end post for connecting the heater element. | $26.85 | |
| Main Power Switch-White with lighted indicator | Replacement Main Power Switch. May or may not have green light on switch. 306-0024 replaces 306-0023. | $38.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 20″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $26.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 25″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $29.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 30″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $34.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 35″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $39.85 | |
| Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for 1 pc. Alum Bars on 30″ machines | Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad. | $45.85 | |
| Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for 1 pc. Alum Bars on 35″ machines | Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad. | $49.85 | |
| Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for Alum Bars on 25″ machines | Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad. | $39.85 | |
| Pressure Bar Insert (19.25″) for older style 20″ machines | Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement. | $53.00 | |
| Pressure Bar Insert (24.50″) for older style 25″ machines | Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement. | $59.00 |