Model 540Plus – Replacement Parts
| Name | Summary | Price | Buy |
|---|---|---|---|
| 1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 108′ Roll | 1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.) | $239.85 | |
| 1-1/2″ wide PTFE Fabric Tape with 1/2″ non-sticky Zone down the middle for over the element – 50′ Roll | 1-1/2″ wide PTFE Fabric tape with a 1/2″ non-adhesive zone down the middle for over the element. (10′ length.) | $153.85 | |
| 1.5″ Pressure Bar Tape 108′ roll | 1.5″ Pressure Bar Tape 108′ roll | $227.00 | |
| 1.5″ Pressure Bar Tape 10′ roll | 1.5″ Pressure Bar Tape 10′ roll | $45.00 | |
| 1.5″ Pressure Bar Tape 25′ roll | 1.5″ Pressure Bar Tape 25′ roll | $74.00 | |
| 1.5″ Pressure Bar Tape 50′ roll | 1.5″ Pressure Bar Tape 50′ roll | $133.00 | |
| 1/2″ PTFE TAPE 108′ roll | 1/2″ PTFE TAPE 108′ roll | $89.85 | |
| 1/2″ PTFE TAPE 50′ roll | 1/2″ PTFE TAPE 50′ roll | $61.85 | |
| 1/8″ Heating Element – 15″ | 1/8″ Heating Element – 15″ | $24.85 | |
| 2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 108′ Roll | 2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 108′ Roll | $233.00 | |
| 2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll | 2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll | $148.00 | |
| 3/8″ Brazed Heating Element – 25″ | 3/8″ Brazed Heating Element – 25″ | $91.00 | |
| Element Pad Assembly 15″ (14.25″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $29.85 | |
| Element Pad Assembly 20″ (19.25″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $31.85 | |
| Element Pad Assembly 25″ (24.50″ actual) | Element pad assembly is the pad under the heater element that consists of 1/8″ Alum. pad and green gasket covered by 1/2″ wide PTFE fabric tape. The EPA is centered under the element and is held down with the double sided tape included. | $34.85 | |
| Finger Nut ( Brass ) | Brass Finger nut is used to secure the element to the element post. Finger nuts are sold as an Each Quantity. | $2.00 | |
| Foot Switch (Electric, 3 Wire) with 8′ Cord (Not for models 235, 35 nor 35G) | Replacement Foot switch with 8′ wire for all models Except 235, 35 and 35G. See part #306-0069 for switch only (without cable) for ease of installation or if you have an extended cable (longer than 8′). | $108.85 | |
| Foot Switch without cord | Replacement Foot switch without cable. May be easier to install as no entry to case will be needed. Pay close attention to how wires are connected to your current switch so new switch can be wired correctly. | $56.85 | |
| Heating Element – 1/4″ x 15″ | Heating Element – 1/4″ x 15″ | $21.85 | |
| Heating Element – 1/4″ x 20″ | Heating Element – 1/4″ x 20″ | $22.85 | |
| Heating Element – 1/4″ x 25″ | Heating Element – 1/4″ x 25″ | $29.85 | |
| High Tension Slider Assembly – Spring loaded element tensioner | *For Most Models* The High Tension Slider Assembly fits most machines. It does not fit the model 635HP, 235 series, model 50 and model 60. The Slider Assembly is the sliding post that the heater element attaches to that enables the heater element to expand when it heats. | $74.85 | |
| Locking Insulated Stud Assembly with SS hardware | Locking Insulated Stud assembly with SS Hardware fits most Machines. It does not fit the model 235, model 50, or model 60 series machines. The locking insulated stud assembly is the fixed end post for connecting the heater element. | $26.85 | |
| Main Power Switch-White with lighted indicator | Replacement Main Power Switch. May or may not have green light on switch. 306-0024 replaces 306-0023. | $38.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 15″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $24.85 | |
| Pressure Bar (Upper one) PTFE 1-1/2″ Cover Tape for 25″ | The PTFE Fabric cover tape includes a strip of 1-1/2″ full adhesive backed PTFE Fabric tape to cover the pressure bar. NOT for over the element. | $29.85 | |
| Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for Alum Bars on 15″ machines | Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad. | $21.00 | |
| Pressure Bar 1-1/2″ PTFE Cover Tape & 1/2″ Pad Cover Set for Alum Bars on 25″ machines | Includes 1 piece of 1/2″ Red Silicone Foam with double sided tape to attach it to the pressure bar and then 2″ wide Full Adhesive PTFE tape cut to length to cover the rubber pad. | $39.85 | |
| Pressure Bar Insert (14.25″) for older style 15″ machines | Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement. | $50.00 | |
| Pressure Bar Insert (19.25″) for older style 20″ machines | Includes an aluminum channel piece that inserts into the underside of the pressure bar and includes the silicon rubber and PTFE pre-applied for easy replacement. | $53.00 |