Skip to content

Element Pad Assembly for HDMP_ -532__ (Not TC) with 35″ x 1/4″ element (Need 1 for each bar)

Price :

$53.00

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

HDMP_ Element pad assembly is the pad under the heater element that consists of green gasket covered by 1/16″ red silicon foam covered with 1/2″ wide PTFE fabric tape. The EPA is centered on the the seal bar but under the element and is held down with the double sided tape included.  Generally need 2 pcs for each machine.  One for the upper bar heating element and 1 for the lower bar element.

Weight 1 lbs

Do you have a Question or Concern?

Name(Required)
Let's us know what you are looking for and want more information on. We will get back to you as soon as we can.
This field is for validation purposes and should be left unchanged.

Attention Customers

Because of a change with our manufacturer, we will be implementing a minimum purchase of $150.00 at checkout. If you have any questions or concerns, please let us know.

Thank you,

Management