Model 8000 – Replacement Parts

NameSummaryPriceBuyhf:categories
2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll

2″ wide PTFE Fabric Tape with 1″ non-sticky Zone down the middle for over the element – 50′ Roll

$148.00
model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-8000-replacement-parts
Element Pad Assembly (Lower Only) for 11″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$79.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Lower Only) for 16″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$81.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Lower only) for 8″ Dual Heat (Not High Temp)

The lower element pad assembly is the pad located under the element on the lower carrier plate. The lower element pad assembly has a piece of foam rubber on the bottom side.

$77.00
model-8000-replacement-parts
Element Pad Assembly (Lower Only) for 8″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$79.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 11″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$81.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 11″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$81.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat (Not High Temp)

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate

$81.00
model-8000-replacement-parts model-830-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$84.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 16″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$84.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 8″ Dual Heat (Not High Temp)

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate

$77.00
model-8000-replacement-parts
Element Pad Assembly (Upper Only) for 8″ Dual Heat & High Temp

The Upper Element Pad Assembly is the pad located under the element on the seal bar on the upper carrier plate. This EPA is configured with Kapton Tape for high-temperature sealers

$79.00
model-8000-replacement-parts
Foot Switch (Electric, 3 Wire) with 8′ Cord (Not for models 235, 35 nor 35G)

Replacement Foot switch with 8′ wire for all models Except 235, 35 and 35G. See part #306-0069 for switch only (without cable) for ease of installation or if you have an extended cable (longer than 8′).

$78.00
model-30-impulse-sealer model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-6300p-replacement-parts model-6300sp-replacement-parts model-630ch-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-6400-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-8000-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Foot Switch without cord

Replacement Foot switch without cable.  May be easier to install as no entry to case will be needed. Pay close attention to how wires are connected to your current switch so new switch can be wired correctly.

$52.00
model-30-impulse-sealer model-35-replacement-parts model-35g-replacement-parts model-50-replacement-parts model-5300-replacement-parts model-530plus-replacement-parts model-540plus-replacement-parts model-60-replacement-parts model-630-replacement-parts model-6300-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-6400-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-730-replacement-parts model-8000-replacement-parts model-830-replacement-parts model-hdmp3-seal-only model-hdmp3-vacuum-sealer model-hdmp3-tc
Heating Element – 1/4″ x 11″ for 11″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$123.00
model-8000-replacement-parts
Heating Element – 1/4″ x 16″ for 16″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$126.00
model-8000-replacement-parts
Heating Element – 1/4″ x 8″ for 8″ Dual Heat High Temp Machines (Need 1 for each bar)

Special element for High Temperature configurations with Kapton film tape sets. Heavy Duty Nichrome heater element with copper plated brass ends to reduce heat build-up and improve element life. This element is not for use on standard models.

$121.00
model-8000-replacement-parts
Heating Element – 3/8″ x 11″ for 11″ Dual Heat Machines

Heating Element – 3/8″ x 11″ for 11″ Dual Heat Machines

$96.00
model-8000-replacement-parts model-830-replacement-parts
Heating Element – 3/8″ x 16″ for 16″ Dual Heat Machines

Heating Element – 3/8″ x 16″ for 16″ Dual Heat Machines

$101.00
model-8000-replacement-parts model-830-replacement-parts
Heating Element – 3/8″ x 8″ for 8″ Dual Heat Machines

Heating Element – 3/8″ x 8″ for 8″ Dual Heat Machines

$94.00
model-8000-replacement-parts
Kapton Tape Set for 11″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$40.00
model-8000-replacement-parts
Kapton Tape Set for 16″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$47.00
model-8000-replacement-parts
Kapton Tape Set for 8″ Dual Heat High Temp Machines (Need 1 for each bar)

Kapton Tape set includes: One piece, 1 1/2″ Kapton Zone Tape with a non-adhesive center zone for over the heater element and One piece, 1/2″ Kapton non-adhesive ribbon for under the heater element. Need 1 set for each bar (upper and lower).

$37.00
model-8000-replacement-parts
Replacement filter cartridge for Optional Vacuum Filter

The replacement filter is used in the vacuum filter # 104-0009 and 104-0013.

$20.00
model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-8000-replacement-parts model-hdmp3-vacuum-sealer model-hdmp3-tc
Thermocouple Assembly – 8000 w/Boot & Tube

The thermocouple assembly on the Model 8000 Vacuum Sealer consists of the Thermocouple, connector, and boot. There is also a piece of 1/8″ tubing to secure the thermocouple wire in the TC block and a piece of 1/2″ Teflon to cover the wire.

$244.00
model-8000-replacement-parts
Vacuum Filter- 1/4″ In/Out (Only for machines with existing vac filters)

The vacuum Filter is used to remove moisture or liquids from the vacuum lines on most model vacuum sealers. In/Out 1/4″. Filters particles to 10 microns. Vacuum Filter uses replacement filter cartridge# 104-0012

$123.00
model-235-replacement-parts model-35-replacement-parts model-35g-replacement-parts model-635-replacement-parts model-635g-replacement-parts model-635hp-replacement-parts model-635hp-g-replacement-parts model-675-smartvac-replacement-parts model-675tc-replacement-parts model-8000-replacement-parts
Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$25.00
model-8000-replacement-parts
Vacuum Pad Assembly Set for 8511- 11″ Machine (2pcs @ 16.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$29.00
model-8000-replacement-parts
Vacuum Pad Assembly Set for 8516- 16″ Machine (2pcs @ 21.5″ Overall Length)

Vacuum Pad Assembly Set for 8508- 8″ Machine (2pcs @ 13.5″ Overall Length)

$35.00
model-8000-replacement-parts